Diy Antenna Mast - I have a commercial 40ft crank up mast and it’s got some things that allow the cable to go down inside. You can do this with what's usually called an eave mount or gable end mount. I'm also 6 inches higher up the mast with the coil as compared to the standard 54 hustler mast. They are designed to be portable and provide a decent temporary set up. But for a real man's mast,. I think it would be pretty complicated to pull off with a home project. Then you have the same problem as the 2m and 70cm antenna using the same feedpoint, the vhf air band x 3 equals the uhf air band, or in other words, a vhf air band.
Regardless of the antenna you end up using, get it up higher above the roofline. Here's a few other ideas:. Pvc sags over time, especially when exposed to the elements. I think it would be pretty complicated to pull off with a home project.
![[Download 18+] Diy Portable Antenna Mast](https://i2.wp.com/i292.photobucket.com/albums/mm38/robgreaves/MastStand002Large_zpsf853af61.jpg)
It's not a permanent solution, but it will work for me in the meantime. Here's a few other ideas:. They are designed to be portable and provide a decent temporary set up. Pushups usually come with guy rings. A 30ft pushup mast sitting a foot in the ground and anchored to a roof at the 15 to 20ft range should hold up a j pole fine with no guy wires.
Jerry sevick, w2fmi notes in his book the short vertical antenna and ground. A 30ft pushup mast sitting a foot in the ground and anchored to a roof at the 15 to 20ft range should hold up a j pole fine with no guy wires. The mast is about 10ft tall, and i am sure you could add another 10ft section with proper guying, but i'd use. Regardless of the antenna you end up using, get it up higher above the roofline.
The Mast Is About 10Ft Tall, And I Am Sure You Could Add Another 10Ft Section With Proper Guying, But I'd Use.
I'm also 6 inches higher up the mast with the coil as compared to the standard 54 hustler mast. Then you have the same problem as the 2m and 70cm antenna using the same feedpoint, the vhf air band x 3 equals the uhf air band, or in other words, a vhf air band. A 30ft pushup mast sitting a foot in the ground and anchored to a roof at the 15 to 20ft range should hold up a j pole fine with no guy wires. Pushups usually come with guy rings.
I'd Recommend Looking At The Military Surplus Antenna Mast Systems.
Regardless of the antenna you end up using, get it up higher above the roofline. Pvc sags over time, especially when exposed to the elements. Jerry sevick, w2fmi notes in his book the short vertical antenna and ground. It's not a permanent solution, but it will work for me in the meantime.
I Have A Commercial 40Ft Crank Up Mast And It’s Got Some Things That Allow The Cable To Go Down Inside.
But for a very very short mast, especially if its temporary, then you'll prolly be alright. You can do this with what's usually called an eave mount or gable end mount. They are designed to be portable and provide a decent temporary set up. This is a pretty complete parts list to build a 27ft triangular antenna tower to support a scanner antenna, and probably a gmrs antenna at some point.
But For A Real Man's Mast,.
I think it would be pretty complicated to pull off with a home project. Here's a few other ideas:.
Pvc sags over time, especially when exposed to the elements. I'd recommend looking at the military surplus antenna mast systems. You can do this with what's usually called an eave mount or gable end mount. It's not a permanent solution, but it will work for me in the meantime. Pushups usually come with guy rings.