Diy Aim Spool - I have plenty of scrap aluminum to machine all the parts for the reel or spool holder and the spool of bulk line. They definitely inspired me to get started on my little spool fish tank stand. Get a chopstick or a pencil, put the spool on, then pinch the ends with your big toes on each foot, putting very light pressure on the ground just to keep the spool from wobbling. I also don't see the point of this pnp cable at $175!!! Double over and press together (3). Did you ever get this set up and working greg? Just thinking out loud, in case anyone's considering this!
It's very suitable for outdoor maintenance, garage, farm, craft, and home diy. I want to improve my casting capability, and so i want to make a spool for one of my reels that is. It was fairly easy to diy on the e92. My plan is to purchase some pins and connectors that will allow me to tap into the aim can wires instead, following this thread's instructions.
I also don't see the point of this pnp cable at $175!!! You can wire the power/ground to a switched accessory fuse and the aim will turn on with the car. Compression spring that will fit over the bolt; I have even got a simple idea for a gizmo to move the line back and. Just thinking out loud, in case anyone's considering this!
Pull the ecu from its nest under the black. In this video i made a homemade line spooler our of materials from home depot and lowes.i spent about $6 total1/2 bolt and washers#diyfishing #doityourself. Compression spring that will fit over the bolt; They definitely inspired me to get started on my little spool fish tank stand.
My Plan Is To Purchase Some Pins And Connectors That Will Allow Me To Tap Into The Aim Can Wires Instead, Following This Thread's Instructions.
I have plenty of scrap aluminum to machine all the parts for the reel or spool holder and the spool of bulk line. Jigsaw, circular saw or hand saw; You can wire the power/ground to a switched accessory fuse and the aim will turn on with the car. Double over and press together (3).
I Have Even Got A Simple Idea For A Gizmo To Move The Line Back And.
My reels have a fairly deep line spool thingy, and it kinda limits the distance i can cast. Disconnect the negative terminal on the battery. Did you ever get this set up and working greg? Here’s some video from the sprite as an example.
This Is What I Plan To Do.
Diy fishing line spooler sami omari / fishing world tools and hardware you will need: They definitely inspired me to get started on my little spool fish tank stand. It's very suitable for outdoor maintenance, garage, farm, craft, and home diy. Pull the ecu from its nest under the black.
Place Under Heavy Object (4).
Looking at fe1rx's post, it looks like. I want to improve my casting capability, and so i want to make a spool for one of my reels that is. I also don't see the point of this pnp cable at $175!!! Place a heavy bead of glue on one end (2).
I want to improve my casting capability, and so i want to make a spool for one of my reels that is. I have even got a simple idea for a gizmo to move the line back and. Double over and press together (3). It was fairly easy to diy on the e92. My reels have a fairly deep line spool thingy, and it kinda limits the distance i can cast.